| Cisco Catalyst 9800-L-F-K9 Specifications | |
|---|---|
| Model | C9800-L-F-K9 |
| Form Factor | 1RU, half-width chassis (side-by-side installation supported) |
| Dimensions (H x W x D) | 1.58 in (4.02 cm) x 8.5 in (21.59 cm) x 9.06 in (23.01 cm) |
| Maximum Access Points | 250 |
| Maximum Clients | 5000 |
| Maximum Throughput | 5 Gbps |
| Maximum WLANs | 4096 |
| Maximum VLANs | 4096 |
| Uplinks | 2 x 10G Multigigabit Copper or 2 x 10G Multigigabit Fiber |
| Power Supply | 110W, 12VDC AC/DC adapter |
| Maximum Power Consumption | 84.5W (with 2 x 2.5W SFPs and 4.5W USB load) |
| Deployment Modes | Centralized, FlexConnect, Fabric |
| Licensing | Smart License enabled |
| Operating System | Cisco IOS XE |
| Management | Cisco DNA Center, Cisco Prime Infrastructure, Third-party APIs |
| Access Point Support | Cisco Aironet 802.11ac Wave 1 & Wave 2 nCisco Catalyst 9100 Series (802.11ax) |
| Wireless Standards | IEEE 802.11a/b/g/d/e/h/n/k/r/u/w/ac Wave 1 & 2, 802.11ax |
| Wired Standards | IEEE 802.3, 802.3u, 1000BASE-T, 1000BASE-SX/LH, 802.1Q, 802.1AX |
| Security | WPA, WPA2 (802.11i), AES, 3DES, IPsec, TLS 1.0/1.2, MACsec |
| AAA | IEEE 802.1X, RADIUS, EAP, TACACS+, Web Authentication |
| Management Interfaces | Web (HTTP/HTTPS), CLI (SSH/Telnet), Serial, SNMP v1/v2c/v3 |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Operating Humidity | 10% to 95% non-condensing |
| Operating Altitude | 0 to 3000 m (0 to 10,000 ft) |
| Maximum Heat Dissipation | 288.2 Btu/hr |
| Sound Level | 40 dBA (Normal), 42.9 dBA (Max at 40°C) |
| Regulatory Compliance | UL/CSA/IEC 60950-1, FCC, CISPR 22, EN55022/55032, ICES-003, VCCI |
